Accenture Life Safety Solution

    Accenture Life Safety Solution A wireless, real-time solution which continuously monitors a worker's exposure to gas and their location.

    Venits LS Logo

    The Accenture Life Safety Solution (ALSS) is a wireless, real-time solution which continuously monitors a worker's exposure to gas and their location while in a plant environment using the Ventis LS multi-gas detector. Exclusive to the ALSS, the Ventis LS:

    • Detects one to four gases including H2S, O2, LEL, CO, SO2 and NO2
    • Transmits gas level and alarm information over a Wi-Fi network
    • Sends an alert to the control room if the worker activates the instrument's panic button or if lack of motion is detected
    • Enables a worker's location to be pinpointed in real time at a central console
    • Operates on  iNet  - Industrial Scientific's unique Gas Detection as a Service solution

    Case Material:
    Polycarbonate with Protective Rubber Overmold

    Dimensions:
    133mm x 73mm x 56mm (5.24" x 2.87" x 2.2")

    Weight:
    256 g (9 oz) - Ventis LS, Lithium-ion Battery Version (typical)
    304 g (10.7 oz) - Ventis LS Extended Lithium-ion Battery Version (typical)

    Operating Temperature Range:
    -20°C- 50°C (-4°F-122°F) typical

    Operating Humidity Range:
    15%-95% Non-condensing (continuous) typical

    Display/Readout:

    Backlit Liquid Crystal Display (LCD)

    Power Source/Run Time:
    Rechargeable Lithium-ion Battery Pack
        (12 hours typical @ 20ºC) - Ventis LS
    Rechargeable Extended-Range Lithium-ion Battery Pack
        (20 hours typical @ 20ºC) - Ventis LS

    Panic and Man Down Alarm :
    Panic alarm - triggered by user surpressing red panic button
    Man down alarm - triggered by lack of motion at user - defined interval.
    Local alarm with ultra-bright LEDs, loud audible alarm (95dB at 30cm) and vibrating alarm.
    Remote alarm via WiFi to central console

    Wireless
    Remote gas readings

    Sensors: 
    Combustible gases/methane - Catalytic Diffusion
    O2, CO, H2S, NO2, SO2 - Electrochemical

    Measuring Ranges:
    Combustible Gases: 0-100% LEL in 1% increments
    Methane (CH4): 0-5% of vol. in 0.01% increments
    Oxygen (O2): 0-30% of vol. in 0.1% increments
    Carbon Monoxide (CO): 0-1,000 ppm in 1 ppm increments
    Hydrogen Sulfi de (H2S): 0-500 ppm in 0.1 ppm increments
    Nitrogen Dioxide (NO2): 0-150 ppm in 0.1 ppm increments
    Sulfur Dioxide (SO2): 0-150 ppm in 0.1 ppm increments

    Location
    Accuracy within 20 feet

    Certifications:

    • UL
      • Class I, Division 1, Groups A B C D, T4
      • Class II, Groups F G (Carbonaceous & Grain Dust)
      • AEx d ia IIC T4
      • IP66
      • IP67
       
    • ATEX
      • Ex d ia I Mb / Ex d ia IIC T4 Gb;
          Equipment Group and Category I M2 and II 2G
      • IP66
      • IP67
       
    • IECEx
      • Ex d ia IIC T4 Gb
      • IP66
      • IP67
       
    • CSA
      • Class I, Division 1, Groups A B C D, T4 Exia
      • C22.2 No. 152 for %LEL reading only
      • Ex d ia IIC T4