WinGas
• 1-4 Analog input channels
• On-board relays
• Continuous auto test
• Central control network
The WinGas control unit is the solution to gas detection requirements in most industrial sectors. It has been manufactured especially for the protection of your personnel and your environment, evaluating in places likely to contain explosive or toxic gases. WinGas can be fitted with 4 independent channels, one display panel, common relays and a remote relay module.
Compliant with European norms, this fixed system was designed to maximise accuracy, reliability and decrease the maintenance usually required.
Type:
|
Wall mounted |
Capacity:
|
4 independent channels |
Function:
|
Gas monitoring panel |
Measurement:
|
Continuous |
Input:
|
4-20 mA - 2 or 3 wires |
Connection:
|
Screened cable 2 or 3 active wires |
Serial Interface:
|
RS 485 - 2 active wires and cable plait |
Display Panel (in option):
|
4 red digits |
Alarms:
|
2 gas alarm levels increasing or decreasing per channel |
Visual Alarms:
|
8 red LED (1 per alarm and per channel)
1 yellow LED (fault)
1 green LED (power on indication) |
Audible Alarms:
|
Buzzer: 90 dB at 1m |
Acquit Function:
|
Automatic for the alarm AL1
Programmable for the alarm AL2 |
Relays:
|
1 common relay AL1
1 common relay AL2
1 common fault relay in positive security
1 state relay
Contact:
- NO/NF
- 2 A/230 VCA/30 VCC on resistive circuit |
Power Supply:
|
230 VAC
115 VAC or 24 VDC (on request) |
Power Consumption:
|
30 W |
Protection:
|
IP 66 |
Weight:
|
1.6 Kgs |
Dimensions:
|
239 x 210 x 120 mm |
Operating Temperature:
|
-10°C to +60°C (14°F to 140°F) |
Conformity:
|
EN 50 054 and EN 50 057 |
CEM:
|
EN 50 082-2 and EN 50 081-1 |