The MX 62 provides a redundant system to ensure an accurate analysis from the sensors. The MX 62 monitor has incorporated these new requirements and other future needs. Through its modularity, flexibility, installation and reduced operational costs, the MX 62 is an attractive solution for all gas and flame detection needs.

The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated systems.

A secure installation for optimized costs
      An entirely secure installation
      • The structure of the MX 62 system has been developed to provide dual measurement. Reliable data is passed quickly from
         the detectors to the relays.
      A structured programming
      • The ConfigPro.exe software configures the MX 62 via a PC.
      • Access to the different functions is protected by several passwords.

Space saving and easy access
      An optimized cost
      • The innovative design meets the new requirements in terms of security and safety
      • The modularity allows a personalized operation and reduces wiring costs
      • The flexibility helps integration of your system
      • The reliability ensures minimum maintenance
      • Programmable outputs reduce relay requirements


VARIOUS MODULES

      LED Module (A)
      16 channels (8 channels Is standard)
      • 4 alarm thresholds
      • Reset/acknowledge
      • Power “on”
      • Fault

      LCD Module (B)
      Up to 30 displays can be networked with the MX 62, allowing measurement display wherever you require.
      • Graphic, alphanumeric, high definition LCD
      • User-friendly display graphics
      • Data storage: at least 5 days (option)
      • Can be remote via RS 485

      Printer Module (C)
      • Printing alarms, relay operating status, fault, min/max average over 8 hours
      • Type ASCII, alphanumeric 40 or 80 characters
      • Parallel connection

      CPU Module (D)
      The CPU module is the heart of the system. Its backup power supply and two processors secure the MX 62 management.
      Plug in the LED and LCD modules, or remote connection via RS485 (4 wires + shield).
      • Centralized management
      • Connection to different modules
      • Connection to an internal or external printer

      Analog input Module (E)
      Analog signals from the detectors to be input into the control system. Dual converters ensure reliable and redundant
      operation.
      • Direct connection with the MX 62 system or remote via the adapter module
      • Up to 8 measurement points, 2 or 3 wire

      Adapter Module (F)
      • Allows 3 operating modes :
         - Up to 16 addressable detectors in a loop configuration
         - Up to 8 addressable detectors combined with a remote analog module
         - Connection of 2 analog input modules
      • The module can be remote via 2 RS485 networks (2 x 4 wires + screened system)

      Relay Module (G)
      • Fitted with 2 processors linked with the CPU
         - Principal module: 8 relays
         - Extension module: 8 relays
         - NO/NC contacts
         - Breaking capacity: 460 VA, 60 W
         - Positive safety individually programmable
       • The module can be remote via 2 RS485 (2 x 4 wires + screened system)

      Analog Output Module (H)
      • Fitted with 2 processors linked with the CPU
         - Fitted with 8 analog 4-20 mA or 0-10 V outputs
      • Each output is programmed to transmit:
         - The real time value for one each input
         - The linearized value
         - Means or max for a detectors group
      • Mimic module: open collector (56) suitable to drive LED mimic panel as per MX 62 channels

      Communication Module (I)
      • Link to a supervisor for data exportation (PLC, DCS or SCADA)
      • Link with CPU via the RS 232
      • Personalized or ModBus protocol via RS 422
      • Optional communication splitter module available