Contact Us
Worldwide Offices
Choose Your Region
Language Selection
Don't Buy Gas Detectors
Find out why.



4800 Controller

  • 8-48 Analog input channels
  • Up to 72 digital input channels
  • Optional datalogging
  • Telephone dial-out

Industrial Scientific's 1600 Controller is capable of monitoring up to 16 sensors of digital ModBus RTU channels of either iTrans™ or Digital Transmitters. Using the Industrial Scientific ModBus register set, the 1600 Controller will automatically recognize and configure channels based on the number of sensors attached to the unit; simplifying installation time and costs. A single on-board relay can be used to activate an external alarm device when alarm levels are reached. The 1600 Controller can be programmed to activate up to 16 external ModBus relay modules (available from third party sources). A secondary RS-232 interface is available to connect the controller to larger control systems, PLCs, or DCS systems.

Feature
Benefit
8 – 48 Input channels
User selectable number of input channels for small and large controller applications
   
ModBus RTU interface
4800 Controller can be set up as a ModBus Master or ModBus-slave device. As a slave device, the 4800 can communicate back to SCADA, HMI, and PLCs.
   
Up to 72 ModBus input channels
The 4800 controller can monitor up to 72 ModBus devices on a single network. This is in addition to the 8 – 48 analog inputs.
 
   
Relay output cards

Allows control of external alarms, horns, fans, etc.
 
 
LCD display

Large, bright display can be seen from across plant. Display used to set up controller, display channel readings, and alarm notification settings.
   
Independent relay activation

Enables user to tie multiple channels to a single relay, or multiple relays to a single channel.
 
 
Telephone interface

Allows programming of controller via the telephone.
 
 
Telephone dial out capabilities

In alarm, the controller can call out via preprogrammed telephone call lists, alerting plant engineers of alarms.
 
 
The 4800 Controller is an analog/digital input/output system controller with remote dial out and access capabilities. The base unit consists of a micro-controller with display, modem, AC and phone line surge protection and 24-hour battery back up. A maximum number of 72 channels can be used, however the maximum number of modules (input and output) can not exceed 6 in any combination. Industrial Scientific recommends that a fixed system application survey be completed to help provide the most accurate assessment of your equipment requirements.

4800 Controller Base Part Number: 4800-ABCDEFGH
                              
A = Base Unit
E = Controller to controller Support Options
B = Analog Input Options
F = Relay Options
C = Digital Input Options
G = Data Logging Options
D = ModBus RTU Support Options H = SCADA connection Options

Ordering example: A 4800 Controller in a NEMA 4X wall mounted enclosure with 16 analog input channels, 8 ModBus RTU input channels, and 8 relay contacts would have a part number of 4800-12010200

A - Base Unit
1 = NEMA 4X Wall mount w/ display and 24 hour battery back up 
2 = Sub-Panel Mount w/ display and 24 hour battery back up 
3 = Flush Mount w/ display and 24 hour battery back up 
4= NEMA 4X Wall mount enclosure w/ display and 24 hour battery back up and internal 24 VDC, 100W Power supply 

B - Analog Input Options
0 = None
1 = (1) 8 Channel Analog Module
2 = (2) 8 Channel Analog Modules (16 channels)
3 = (3) 8 Channel Analog Modules (24 channels)
4 = (4) 8 Channel Analog Modules (32 channels)
5 = (5) 8 Channel Analog Modules (40 channels)
6 = (6) 8 Channel Analog Modules (48 channels)
 
C - Digital (Dry Contact) Input Options
0 = None
2 = 8 - Channel Digital Input Module
 
D - ModBus RTU Input Channels Support Options
0 = None
1 = 8 Channels of RTU Supported
2 = 16 Channels of RTU Supported
3 = 24 Channels of RTU Supported
4 = 32 Channels of RTU Supported
5 = 40 Channels of RTU Supported
6 = 48 Channels of RTU Supported
7 = 56 Channels of RTU Supported
8 = 64 Channels of RTU Supported
9 = 72 Channels of RTU Supported
 
E - Controller/ Controller Support Options
0 = None
1 = Controller to controller communication capable
 
F - Relay Options
0 = None
1 = 1-4 Relay Contact Module (4 relays)
2 = 2-4 Relay Contact Module (8 relays)
3 = 3-4 Relay Contact Module (12 relays)
4 = 4-4 Relay Contact Module (16 relays)
 
G- Data Logging Options
0 = None
1 = Data Logging
 
H - SCADA Connection Options
0 = None
1 = ModBus Slave support via serial, phone or radio modem connection
 
 

Common Configurations
Part Number   Description
4800-12000210   4800 Controller, 16 Analog Inputs, 8 Relay Outputs, w/ Datalogging
4800-12000200   4800 Controller, 16 Analog Inputs, 8 Relay Outputs
4800-12020210   4800 Controller, 16 Analog Inputs, 16 Digital ModBus Inputs, 8 Relay Outputs, w/ Datalogging
4800-14000200   4800 Controller, 32 Analog Inputs, 8 Relay Outputs
4800-10040211   4800 Controller, 32 Digital ModBus Inputs, 8 Relay Outputs, Datalogging, SCADA Connection
4800-16000000   4800 Controller, 48 Analog Inputs, No Relay Outputs
4800-10090410   4800 Controller, 72 Digital ModBus Inputs, 16 Relay Outputs
     

4800 Controller Accessories
Part Number   Description
77026110   8 Channel Analog Input Card
77026128   4-Relay Contact Module
 



Industrial Scientific Predictive Solutions
Home | iNet | Products | Training | Where to Buy | Company | Contact Us | Sitemap
© Copyright Industrial Scientific Corporation
Mobile Site