1600 Controller
• 1-16 Digital input channels
• 1 On-board relay
• ModBus master and slave device
• Easy interface to SCADA, HMI, and PLCs
Industrial Scientific's 1600 Controller is capable of monitoring up to 16 sensors of digital ModBus RTU channels of either iTrans™ or Digital Transmitters. Using the Industrial Scientific ModBus register set, the 1600 Controller will automatically recognize and configure channels based on the number of sensors attached to the unit; simplifying installation time and costs. A single on-board relay can be used to activate an external alarm device when alarm levels are reached. The 1600 Controller can be programmed to activate up to 16 external ModBus relay modules (available from third party sources). A secondary RS-232 interface is available to connect the controller to larger control systems, PLCs, or DCS systems.
Enclosure:
|
Fiberglass, NEMA 4X (weather resistant, lockable) Or Flush mount |
Dimensions:
|
356 mm x 305 mm x 165 mm (14” x 12” x 6.5”) (NEMA)
248 mm x 183 mm x 63.5 mm (9.75” x 7.22” x 2.5’’) flush mount |
Weight:
|
Approximately 0.9 kg (2 lbs) |
Number of Inputs:
|
16 ModBus RTU inputs |
Sensor Excitation Voltage:
|
Optional 24 VDC, 45 W and 100W optional power supplies available. |
Display:
|
LCD, Backlit, Auto-shutoff |
Output:
|
1 relay, SPDT
RS-232 Serial Port |
Contact Ratings:
|
0.5 A at 120 VAC |
Output Connectors: |
RS-232: 9 Pin D Sub-miniature, Male
Relay: Quick disconnect, screw terminal
Input voltage: 12 VDC |
| Part Number |
Description |
| 1600-12211 |
NEMA 4X Wall mount enclosure with 12 V, 45 W power supply* |
| 1600-22211 |
Flush/Sub – panel mount with 12 V, 6 W power supply** |
| 1600-32211 |
NEMA 4X Wall mount enclosure with 12 V, 100 W power supply*** |
*Can power 6 iTrans™ units or 16 Digital Transmitters
** External power supply must be supplied to power iTrans™ and Digital Transmitters
*** Can power 16 iTrans™ units (single sensor versions) or 16 Digital Transmitters
|
Oldham 1600 Contoller Documents
Manuals
>> visit this product's information page